- Type: Diesel injection pump test service
- Voltage: 220V/380V/440V
- Power: 7.5,11,15,18.5,22KW
- Certification: CE
- Applicable Models: Injection pump,VE pump
- Place of Origin: Guangdong, China (Mainland)
- Brand Name: Honow
- Model Number: NTS815
- Warranty: 12 Months
- Adjustable cylinders numbers: 12
- Main motor output power(kw): 7.5,11,15,18.5,22
- Stroke Counting (Rpm): 50-9999
- Power of fuel pump motor (kw): 0.75
- Scope of rotate speed (r/m): 0~4000
- Volume of fuel tank(L): 40
- DC power supply: 12/24V
Packaging & Delivery
|Packaging Details:||4 CBM, 900Kg/units, 20' container quantity 7units,|
|Delivery Detail:||7 days upon receive the payment|
>>>>Introduction NTS815-- continuous fuel delivery analysis computerised measuring system for conventional and new diesel injection systems.the electronic fuel delivery measuring system is compulsory for modern diesel injection system testing.It guarantees a high level of reproductivity of the measured valuse.
1.Measurement of each cylinder delivery at any speed.
2. Test point and interval angle of oil supply of injection pump.
3. Checking and adjust the mechanical governor.
4. Checking and adjusting the distributor pump.
5. .Experiment and adjusting of behavior of supercharging and compensatory device.
6. Measurement of oil return of distributing pump
7. Testing of the electromagnetic valve of distributor pump.(12V/24V)
8. Measurement of the internal pressure of distributor pump.
9. Checking of the advance angle of advance device.(on request)
10. Checking the sealing of injection pump body
11. Install tube of auto-sucking oil supply can check on oil supply pump(including VE pump.)
12. Checking the travel of stroke
13.Oil lubricate (on request)
14.Cast iron base(on request)
15.Forced cooler (on request)
1. Main motor output power(kw):7.5,11,15,18.5,22
2. Stroke Counting (Rpm):50-9999
3. Standard injectors:ZS12SJ1
4. Low pressure of fuel oil pressure(Mpa):0~0.4
5. High pressure of fuel oil pressure(Mpa):0~4
6. Power of fuel pump motor (kw):0.75
7. Volume of fuel tank(L):40
8. Number of cylinders:12
9. Height of principal axis center (mm):125
10. Filter oil precision of test bench(μ):4.5~5.5
11. Big and small volumetric cylinder(ml):150 45
12. Control temperature of fuel (°C): 40±2
13. Flywheel inertia(kg*m):0.8~0.9
14. Measuring range of flow meter(L/m):10~100
15. DC electrical source(V):12 24
16. Positive pressure of air supply(Mpa):0~0.3
17: Negative pressure of air supply(Mpa):-0.03~0
18: Dimension of Packing ( L*W*H(m)):2.30*1.10*1.70
19: Gross weight of Test bench(kg):900